MPN# KVR24S17S6/4
UPC# 740617273953
Kingston Memory KVR24S17S6/4 4GB 2400MHz DDR4 Non-ECC CL17 SODIMM 1Rx16
DESCRIPTION
This document describes ValueRAM’s KVR24S17S6/4 as a 512M x 64-bit (4GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. This 260-pin SODIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
FEATURES
? Power Supply: VDD = 1.2V Typical
? VDDQ = 1.2V Typical
? VPP = 2.5V Typical
? VDDSPD = 2.2V to 3.6V
? Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
? Low-power auto self refresh (LPASR)
? Data bus inversion (DBI) for data bus
? On-die VREFDQ generation and calibration
? Single-rank
? On-board I2 serial presence-detect (SPD) EEPROM
? 8 internal banks; 2 groups of 4 banks each
? Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
? Selectable BC4 or BL8 on-the-fly (OTF)
? Fly-by topology
? Terminated control command and address bus
? PCB: Height 1.18? (30.00mm)
? RoHS Compliant and Halogen-Free
CL(IDD)
17 cycles
Row Cycle Time (tRCmin)
45.75ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin)
350ns(min.)
Maximum Operating Power
TBD W
UL Rating
94 V – 0
Operating Temperature
0o C to +85o C
Storage Temperature
-55o C to +100o C
Item Dimension (L inchxW inchxH inch)
3 x 7 x 1
Weight
1.00 lb
Warranty Information
Lifetime Manufacture Warranty
There are no reviews yet.